YSGBR, BACK RETAINER
CENTER SPANNERS
INSERT INTO THE
SLOTS FROM THE
TOP.(SEE NOTE 4)
YSGJSC
CENTER SPANNER
MAKE SURE CHANNELS
ON SPANNERS ARE
INSTALLED ON OUTSIDE
AT BOTTOM. (SEE NOTE 2)
YSGBR
BACK RETAINER
YSGJSC
CENTER SPANNER
1: ASSEMBLE UPRIGHTS, BASE SHOES,
LOWER SPANNERS, AND CENTER SPANNERS.
ALSO INSTALL (1) BACK PANEL INTO EACH
"Y" GONDOLA SECTION. THIS WILL HELP TO
KEEP THE RUNS STABLE.
SEE STORE LAYOUT FOR LOCATIONS.
NOTE: REFERENCE ASY-046 FOR ASSEMBLY
INSTRUCTIONS ON BASIC GONDOLA
COMPONENTS.
2: INSERT (3) RETAINERS FLUSH WITH THE
BOTTOM SPANNERS, AND THEN INSTALL
(3) CENTER SPANNERS FROM THE TOP
THROUGH THE SLOTS, MAKING SURE THAT
THE TRACK FACES OUT SO THE BACKS WILL
HAVE SOMETHING TO REST INTO.
3: AT "Y" JUNCTION INSERT THE BACK
RETAINERS INTO THE UPRIGHTS AT THE SAME
HEIGHT AS THE OTHER CENTER SPANNERS.
4: ONCE RETAINERS ARE IN POSITION, INSERT
THE CENTER SPANNERS FROM THE TOP,
THROUGH THE SLOTS OF THE RETAINERS,
MAKE SURE THAT THESE SPANNERS HAVE
THE TRACK FACING TOWARDS THE INSIDE
OF THE JUNCTION. THIS WILL ALLOW THE
BACKS TO BYPASS THE SPANNERS.
REV.
DESCRIPTION
DATE
D
C
B
A
4
3
2
1
4
3
2
D
C
B
A
1
Asy-80015871
P.O. BOX 729 TERRELL, TEXAS 75160
214-515-5400 / 800-776-2349
PAGE 1 OF 4
ECM # 500000011726
REV. 02
01/08/09 CAB
ASY FOR INSIDE Y GONDOLA
CRITICAL NOTE - READ THIS BEFORE INSTALLING ANY PARTS:
CORNER SHELVES, BOTH BASE AND UPPER, WILL NEED TO BE
INSTALLED FIRST TO INSURE THAT THERE IS ROOM INSIDE
UPRIGHTS FOR ALL SHELVING
