Product User Guide | 3
Device Operation (cont’d)
Downloading Data from a Data Logger
1. Place the logger into the docking station (IFC400 or
IFC406).
2. Highlight the data logger in the
Connected Device
s
list. Click
Stop
on the menu bar.
3. Once the data logger is stopped, with the logger
highlighted, click
Download
.
4. Downloading will offload and save all the recorded
data to the PC.
Device Maintenance
Battery Replacement
Materials:
Replacement Battery (Tadiran TL-2150/S)
1. Move device to a non-hazardous location before
replacing battery.
2. Observe Operational Warnings when removing and
replacing the battery.
3. Unscrew the bottom of the data logger and remove the
battery.
4. Place the new battery into the logger.
Caution:
Observe
correct battery polarity when installing.
5. Screw the cover onto the data logger.
Temp1000IS
PRODUCT USER GUIDE
O-Rings
O-ring maintenance is a key factor when properly
caring for the Temp1000IS. The O-rings ensure a tight
seal and prevent liquid from entering the inside of the
device. Please refer to the application note “O-Rings 101:
Protecting Your Data”, found at
, for
information on how to prevent O-ring failure.
Recalibration
Recalibration is recommended annually. To send devices
back for calibration, visit
.
Additional Services:
Custom calibration and verification point options
available, please call for pricing.
Call for custom calibration options to accommodate specific application needs.
Prices and specifications subject to change. See MadgeTech’s terms and conditions
at
To send devices to MadgeTech for calibration, service or repair, please use the
MadgeTech RMA Process by visiting
Communication
To ensure desired operation of the TEMP1000IS,
please keep the surface clear of any foreign objects or
substances
. The TEMP1000IS’s data is downloaded through external contact with the IFC400 or IFC406 docking
station. Covering the surface with foreign objects
(i.e. Calibration Labels)
can prevent the communication and/
or downloading process.