User’s Manual for Xplore
Version 2.53 - Version date: 15.02.2022
Page
6
of
46
3.
Pre-Check
What is a pre-check?
Pre-check is a check performed to discover wear on important parts.
Types of pre-check:
Daily
: The most important parts are checked daily before use.
Monthly
: Other wear parts are checked for wear once a month.
Why to perform:
To discover wear and replace worn parts before eventual part breakage.
Who to perform:
Trained caretakers. Only trained caretakers are allowed to check + operate the
product.
What to perform:
The test-steps are described below.
What to do if error
is discovered:
Contact your Made for Movement representative to agree on actions/repairs.
Daily Pre-check:
Daily, before use, the following shall be checked by the caretaker:
1.
Belts
–
Check that all belts are intact and without visible damages and that all seems are intact.
2.
Buckles
- Check that the buckles are intact, and locks well.
Monthly Pre-check:
Once a month the following is to be checked by the caretaker:
1.
Belts
–
Check that all belts are intact and without visible damages and that all seems are intact.
2.
Buckles
- Check that the buckles are intact, and locks well.
3.
Chest + Hip support
–
Hold on to both chest supports, and then try to push, pull and rotate the supports in
all directions. Repeat on the hip supports. Check that all parts sit tight.
4.
Chassis
–
Apply the brake, lift up the front of the product by holding on to and raising the 2 front wheels.
Try to push, pull and rotate the front axle in all directions while holding in the wheels. Check that all parts
sit tight.
5.
Feet divider
- Check that the divider is intact and is tight.
6.
Wheels
–
Check that the rear wheels can’t move sideways on the axle more than 3mm.
Contact your Made for Movement representative if errors are discovered to agree on actions/ repairs.
Don’t use the product before this is settled.
For more tips on how to execute the pre-checks, scan the QR code and examine the Pre-check
instructions given.
