
Users manual for Innowalk Pro 2
Version: 1.06
–
Version date: 06.12.2023
Page
48
of
78
7.5
Warnings
General warnings
1)
The product shall only be used under supervision by a trained, responsible person.
2)
Only persons who have received training in the use of the product shall operate the product with
the user. Please see Appendix 1 for details about the content of the training.
3)
Contraindications and pre-cautions should always be clarified by clinician or therapist before
using the product for the first time. Where there is a user risk due to the users condition, the
clinician or therapist should state that the benefits outweigh the risks before use.
4)
Always perform the daily pre-check before use.
5)
Always perform the monthly pre-check to discover wear.
6)
If any abnormalities are discovered during the pre-check, the product must be put in order
before use.
7)
During use some adjustment screws can unscrew themselves slightly over time due to moving
parts, adjustment parts, or torsion in the product. Tighten loose screws before use.
8)
The product shall be adjusted when necessary to ensure that the product fits the user in regard
to user growth and user functionality. The adjustments must be performed by a Made for
Movement trained person.
9)
The product must be adjusted, used, and set up as described in this user manual.
10)
No modification of this product is allowed. Modifications may lead to dangerous situations,
product breakdown and non-compliance of the certification.
11)
Do not fit other accessories to the product, other than approved by Made for Movement. This
will lead to non-compliance of the certification.
12)
The product is a medical device and must under no circumstance be used by persons who the
product is not fitted to.
13)
The chest and hip belt shall always be secured when the user is in the product. The chest and hip
belts can have looser fitting during use, but cannot be taken of for safety reasons.
14)
Make sure there always is a piece of clothing between the skin of the user and where the
product comes in contact with the user. This will minimize the risk for wounds caused by friction
and possible allergic reactions. All materials in the product which are in contact with the user are
tested for allergy.
15)
The product shall only be used with shoes which fits the product.
16)
Never use the product, with or without user, if the ambient temperature is exceeding the
maximal temperature 40°C. Check the surface temperature of the product before use. The
temperature of the product could be affected by radiators and direct sunlight, etc.
17)
Some areas of the product have a trap hazard due to moving or moveable parts. These are
marked with a trap hazard label. Pay extra attention to these areas when the user is entering or
exiting the product, and during use. Be careful and pay attention to where the user places
his/her hands, and where you in your role as operator hold onto the product.
18)
The use of synthetic clothes can cause an unharmful static shock in the product.
19)
Always use the product in a well-lit room, so all labels and operating controls can be easily
viewed.
20)
The product must be stored in a way which prevents people from using the product as a toy or
from influencing the settings of the product.
21)
The product must be stored in a dry room.