Specifications:
Length: 50”
Diameter 2.6”
Weight: 21oz
Recovery: 24” Nylon Chute
Motor Mount: 29mm
Fins: 8 - 1/8” Plywood
CG: 31” from nose tip
Recommended Motors:
Single
Use RMS
F20W-4 780’ F40W-7 1100’
F50T-6
975’
G64W-7
1620’
G40W-7 1440’
G80T-7 1700’
Parts List
1. (1) Molded nose cone
2. (1) Pre-slotted body tube (10.5”)
3. (1) Mid section body tube (20.5”)
4. (1) Forward section body tube (10.5”)
5. (2) Centering rings
6. (1) Bulkhead
7. (1) Eyebolt, nut & washer
8. (1) 29mm motor tube
9. (8) laser-cut fins
10. (1) Kevlar® shock cord section
11. (1) Nylon shock cord section
12. (1) 9”x9” flameproof chute protector
13. (1) 24” Nylon chute
14. (2) ¼” launch lugs
15. (2) Couplers
16. (1) Cut Vinyl Decal
Required to complete
: 5 minute epoxy,
120/220 sandpaper, masking tape, finishing
filler/paint.
K-146
PAC-3
8
98666 00146
8
®
