Specifications:
Length: 19.5”
Diameter 2.6”
Weight: 10oz
Recovery: 18” Nylon Chute
Motor Mount: 29mm
Fins: 3 - 1/8” Plywood
CG: 11.25” from nose tip
Recommended Motors:
Single
Use RMS
D12-3*
310’
E16W-4
650’
F21W-6* 1070’
E23T-5 720’
F20W-7 1320’ F22J-4 1050’
F25W-6 1400’ F40W-7 1400’
F26J-9 1220’ G33J-5 1600’
G38J-7 1470’
*Requires 29/24 adaptor
Parts List
1. (1) Custom balsa nose cone
2. (1) pre-slotted body tube
3. (2) Centering rings
4. (1) 29mm motor tube
5. (3) laser-cut fins
6. (1) Kevlar® shock cord section
7. (1) Nylon shock cord section
8. (1) 9”x9” flameproof chute protector
9. (1) 18” Nylon chute
10. (2) ¼” launch lugs
Required to complete
: 5 minute epoxy,
120/220 sandpaper, masking tape, finishing
filler/paint.
8
98666 00112
3
K-112
