Dustbunny
FX TYPE: Fuzz
Based on the Tonebender™
Enclosure Size: 1590A
“Softie” compatibility: none
©
2020
Overview
The DustBunny is a simple, negative ground silicon Tonebender fuzz fitted for a 1590A enclosure.
Controls
• FUZZ:
Fuzz from min to max.
• VOL:
Output
Terms of Use:
You are free to use purchased
Dustbunny
circuit boards for both DIY and small commercial operations. You may not
offer
Dustbunny
PCBs for resale or as part of a “kit” in a commercial fashion. Peer to peer re-sale is fine, though.
Technical assistance
for your build(s) is available via the
. Please go there rather than emailing me for
assistance on builds
. This is because (1) I’m not always available to respond via email in a timely and continuous manner, and (2)
posting technical problems and solutions in the forum creates a record from which other members may benefit.
