4
5
Mayer & Co Beschläge GmbH
Alpenstraße 173
5020 Salzburg
Austria
19-003065-PR01
19-003065-PR02
22
EN 14846:2008
3
H
7
0
0
J
0
1
1
The INSTINCT by MACO system has been tested and certified in accordance with EN 14846:2008.
Further certificates, declarations of conformity and proof of performance can be found at
www.maco.eu/instinct.
Important Information
EN 14846 Certificate
For the assembly and installation of the INSTINCT by MACO system, you need the following documents:
› Instructions for use
› System folder for the corresponding door profile
› Assembly instructions
Instructions for use
The instructions for use contain important information on project planning, installation, commissioning,
operation and maintenance of the INSTINCT by MACO system. This document must be handed over to the
client/end user in the course of delivery.
System folder
The system folder contains profile-specific information about milling and drilling as well as information
on cable installation in the profile. In addition, please also note the fabrication guidelines of the profile
manufacturer!
Assembly instructions
The assembly instructions contain profile-independent information for the correct assembly of the
INSTINCT by MACO system. These instructions include the work steps in the factory and the work steps on
the construction site.
