C4, C4 ZINC & C4-51 MODEL MULTI-PURPOSE PUMPS
AG12
0206
Thank you for purchasing either a Macnaught model C4,
C4 Zinc or C4-51 Multi-Purpose Pump.
Please read and retain this instruction sheet to assist
you in the maintenance of this quality product.
Your C4 pump features:
* Adjustable collar with removable bung adaptor to suit
drums with or without plastic spout.
* Fully serviceable, spare parts readily available.
* Delivers approximately 100ml per stroke.
* Fits 18 to 25 litre drums.
* Suitable for Kerosene, two stroke mix, light viscosity oils
and most solvents.
* Model C4-51 is supplied complete with a 1.8m hose and
nozzle.
O R D ER F O R R EPLA C EM EN T
I T EM PA R T N o . N o . o f f
PA R T / SET
KIT . R EF
D ESC R I PT I O N
1
AC42
1
AC42s
PUM P ROD ASSEM BLY
2
AC33
1
AC33s
GLAND NUT
3
AC34
1
GLAND SEAL
4
AC32
1
AC32s incl BS024
BODY
4
AC32-1
1
AC32s-1 incl BS024
B O D Y ( Z IN C )
5
AC2
1
ADAPTOR
6
AC9
1
ADAPTOR
7
BS024
1
AC24s
O'RING
8
N71
1
THUM B SCREW
9
BS216
1
O'RING
10
AC23
1
ADJUSTABLE COLLAR
11
N103
2
WASHER
12
AC31
1
PLUNGER SPRING
13
N265
1
AC6s
SPRING CLIP
14
N105
1
VALVE PLATE
15
AC6
2
PLUNGER DISC
16
N212
1
STELOCK NUT
17
AC10
1
AC10s
PUM P TUBE
18
N412
1
9/ 16" STEEL BALL
19
KM 58
1
AC5s
BALL RETAINER
20
KM 57
1
FOOTVALVE
21
Z47
2
HOSE CLAM P
22
AG87
1
AG87s
HOSE
23
AG24
1
HOSE SPRING
24
AG82
1
AG82s
OUTLET TUBE
PARTS LIST
1
2
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
23
24
22
21
4
20
11
* C4 ZINC Model for use in underground mines.
Before operation ensure that manual non-drip nozzle is
open to prevent pressure build up or hose damage.
INSTRUCTION MANUAL
Macnaught Pty Ltd
PO Box 90 Arncliffe NSW 2205 Australia
Telephone (02) 9567 0401
Facsimile (02) 9597 7773
Email: [email protected]
Web: www.macnaught.com.au
WARRANTY POLICY
Macnaught Pty Ltd (“Macnaught”) warrants that all Products manufactured by Macnaught and
purchased after 1
st
of July 1999 will be free from any defects caused by faulty materials or
workmanship for a period of (5) years from the date of purchase of the product, provided that
during the Warranty period:
1)
Macnaught receives notice setting out full details of any defect in any product and
details of the time and place of purchase.
2)
The Purchaser, at their own cost returns the product to the nearest authorized Macnaught
service center.
For componentry contained in the product, (such as o’rings, seals, springs and hoses ) which
are subject to wear, the warranty period will be (12) months from the date of purchase of the
product.
Macnaught shall, at its option repair or replace any product found defective by its inspection.
This warranty does not cover failure of parts or components which, in the judgment of Macnaught,
arises from misuse, abrasion corrosion, negligence, accident, substitution of non-Macnaught
parts, faulty installation or tampering.
If Macnaught inspection discloses no defect in material or workmanship, repair or replacement
and return will be made at customary charges.
Macnaught’s liability and the purchaser’s rights under this Warranty shall be limited to such
repair or replacement and in particular, shall not extend to any direct, special, indirect or
consequential damage or losses of any nature.
The foregoing warranty supersedes, voids and is in lieu of all or any other warranties.
“Note: This warranty does not form part of, nor does it constitute, a contract between Macnaught
and the end-user or purchaser. It is additional to any warranty given by the seller of the products.
This warranty does not exclude, limit, restrict or modify the non-excludable rights or remedies
conferred upon the end-user or purchaser, or the non-excludable duties or liabilities imposed
on the seller or Macnaught, by Part V, Divisions 2 and 2A of the Trade Practices act 1974
(Commonwealth) or other legislative provisions. Macnaught otherwise excludes, to the extent
permitted by law, any rights conferred on the end-user or duties or liabilities imposed upon it.”
IMPORTANT
0008
