-1-
MCE138
EN
Microwave LED Sensor Light
MCE138
The product adopts microwave LED sensor mould with high-frequency electro-magnetic
wave (5.8GHz) and integrated circuit SMD LED. It gathers automatism, convenience, safety,
saving-energy and practical functions. The wide detection field depends on detectors. It
works by receiving human motion. When one enters the detection field, it can start the load
at once and identify automatically day and night. Its installation is very convenient and its
using is very wide. Detection is possible to go through doors, panes of glass or thin walls.
SPECIFICATION:
Power Sourcing: 220 -240V/AC
Detection Range: 180°/360°
Power Frequency: 50Hz
Detection Distance: wall: 5-15m (adjustable)
ceiling: 2-8m (radius), adjustable
Time Delay: Min. 10sec±3sec
Max. 12min±1min
FUNCTION:
Can identify day and night: It can work in the daytime and at night when it is
adjusted to the “sun” position (max). It can work in the ambient light less than 3LUX when it
is adjusted to the “moon” position (min). As for the adjustment pattern, please refer to the
testing pattern.
SENS adjustable:
It can be adjusted according to using location. The
detection distance of low sensitivity could be only 2m and high sensitivity could be 16m
which fits for large room.
Time-Delay
is added continually: When it receives the second
induction signals within the first induction, it will restart to time from the moment.
Transmission Power: <0.2mW
Installing Height: wall: 1.5-3.5m
ceiling: 2-4m
Rated Load: 10W (20PCS LED)
Detection Motion Speed: 0.6-1.5m/s
Power Consumption: approx 0.9W
HF System: 5.8GHz CW radar, ISM band
