Page
34
of
63
B)
Ensure the hook is attached to the lift tape in the below orientation.
Bottom Cover
This section will instruct the correct procedure on how to remove and replace the Bottom
Cover.
Removal
Step 1 - Remove external covers of the Hoist. (refer to section 9.1)
Step 2
–
Remove QRS Hook. (refer to section 9.6)
Step 3
–
Disconnect the power cable from the PCB.
Step 4
–
Disconnect the display and LED able from the PCB. (Arrowed)
Summary of Contents for TX440 Advanced PT
Page 10: ...Page 10 of 63...
Page 11: ...Page 11 of 63...
