996553
–
Revision A
P a g e
|
13 of 17
Attaching the Carry Bar
Follow the procedure below to attach the Carry Bar to the Quick Release Hook located at the end of the Lift Tape.
1.
Open the hooks locking mechanism by pressing the red tab downward as shown. (Figure 30 and 31)
2.
Position the carry bar horizontally as shown in figure 32 and place the attachment point into the open hook.
3.
Pivot the carry bar down to its natural position and release the hooks locking mechanism to secure the carry bar.
(Figure 33)
4.
Alternatively, with the carry bar positioned sideways, the pin at the top of the carry bar can gently push the locking
mechanism out of the way as the pin is carefully moved into the hook, the locking mechanism will close itself.
To remove the Carry Bar, follow the steps above in reverse.
Figure 30
Figure 31
Figure 32
Figure 33
