995064 – Revision A
Page 31 of 36
9.13 – Knee Pad
Within this section it will explain the correct procedure on removing and reinstalling the
Knee Pad for servicing procedures or replacement.
Removal
Step 1 – Using two 17mm Spanners, remove a nut from either side of the Knee Pad
Attachment Bar. Ensure to grab the Nylon Washer circled.
Step 2 – Slide the Threaded Bar through the Inner Knee Pad Pivot Assembly to remove the
Knee Pad. Ensure to grab the Nylon Washer circled.
Step 3 – Using Circlip Pliers, remove the two Circlips on the underside of the Outer Knee Pad
Pivot Assembly to remove the two pins that secure the Inner Knee Pad Pivot Assembly.
