43
Owner’s Manual
Owner’
s Manual
6.8.2 CLEAR
Click the
CLEAR
button to clear the selected snap-
shot. The snapshot is deleted and the name returns
to
Empty
. Attempting to clear a protected snapshot
produces a warning message.
6.8.3 STORE
Click the
STORE
button to store the current console
state (with filtering if active) in the selected snapshot.
Attempting to store over a protected snapshot produces
a warning message.
6.8.4 RECALL
Click the
RECALL
button to recall the selected snap-
shot (with filtering if active).
6.8.5 Snapshot Filtering
Snapshots can be filtered so only the desired channels
and/or parameters are stored and recalled. Snapshot
filtering can be useful in a variety of situations:
• recall Fader, and Mute settings while leaving DSP
settings unaffected
• recall settings on a few channels leaving the rest
unchanged
• change internal effects presets through a specific
order while leaving every other console setting for
live use
The Snapshots window has the following areas rel-
evant to filtering:
• SNAPSHOT PARAMETER FILTERING
The
ACTIVE
button at the top of this area must be
selected or filtering will not occur. Only the select-
ed parameters are included in the Snapshot. The
OTHERS
button refers to DSP functions other than
those listed.
INT 1–4
are the internal effects.
• CHANNEL FILTERING SELECT
Click on the BANK 1–4 or MATRIX A–H buttons
and select the desired channels for that bank from
the list on the right. Only the selected channels are
included in the Snapshot.
• CHANNELS FILTERED Displays the selected chan-
nels for the current Snapshot.
6.9 Aux Master
Figure 6-20 AUX MASTER
Press the
AUX MSTR
QuickMix button to display the
AUX MASTER Touchscreen. The 12 Master Aux Send
levels are controlled by their corresponding QuickMix
knobs. Change the selected Aux Master by pressing the
desired knob. The active Aux Master is displayed on the
top-left of the Touchscreen.
The overview information for the selected Aux Master
is displayed on the top-half of the Touchscreen: meter-
ing, link status, compression and EQ.
Each Aux Send Master also has its own OVERVIEW
Touchscreen (see page 37), which can be displayed by
pressing the
FAT
QuickMix button.
EQ and Comp
Touch the EQ or compressor areas (or press the
EQ
or
DYN
QuickMix buttons) to open their respective
Touchscreens. See
Six-Band Equalizer
and
Compressor
on page 40.
LINK
If the selected Aux Master is stereo linked, the linked
Aux number is listed below
LINK
; it displays OFF other-
wise.