Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7
9
The vertical list along the left shows input channels which will be listed by their default name
and custom name (if assigned). Double clicking a channel will allow you to edit the channel
custom name. These names are in a single column with the following contents:
Destination Input Channels
Notes
Analog 1-24
Full DSP when assigned to Analog Bank
Digital 25-48
Full DSP when assigned to Digital Bank or when
UFXII installed
Line In 1-8
EQ Only
Card 1-8
Full DSP
Input Routing Table
Signal Sources
Drop Down 1
Drop Down 2
Drop Down 3
Hardware Input
Mic/Line
1-24
ADAT
1-24 (44.1 or 48k)
1-12 (88.2 or 96k)
Line
1-8
AES/SPDIF (one will be
shown depending on the
selection in setup>digital)
L-R
Tape
A L-R, B L-R
Talkback
In
Card Slot
A - Card Type (e.g. U100)
1-32 (note LP48 shows
additional detail, see below)
B - Card Type (e.g. U100)
1-32 (note LP48 shows
additional detail, see below)
Each Source Row is color coded according to the selection made in the Drop Down 1 source
type:
• Hardware Input – Pale Blue (a very-faintly blue-tint of white)
• Card Slot - Pale Yellow
Summary of Contents for TT System 32
Page 1: ...F 4A B 0 D0 0334 3D E4AB8 D 30C4...
Page 54: ......
