MIXER
SR24•4-
VLZ PRO
SR24•4-VLZ PRO
24-Channel Sound
Reinforcement Console
O F 8 P A G E S
MIXER
SR24•4-
VLZ PRO
SR24•4-VLZ PRO
24-Channel Sound
Reinforcement Console
O F 8 P A G E S
www.mackie.com
16220 Wood-Red Road NE, Woodinville, WA 98072 USA
800.898.3211, fax 425.487.4337, [email protected]
UK
+44.1268.570.808, fax +44.1268.570.809, [email protected]
SR24•4-VLZ PRO
™
24-Channel
Sound Reinforcement Console
1
O F 8 P A G E S
MIXER
SR24•4-
VLZ PRO
MIXER
SR24•4-
VLZ PRO
O F 8 P A G E S
SR24•4-VLZ PRO
24-Channel Sound
Reinforcement Console
Features
Low noise/high headroom XDR™ (Extended Dynamic
Range) mic preamps with excellent RFI rejection
New high-performance 2068 op-amps for incredibly low
noise and distortion
Improved cooling for even greater thermal protection
20 mic/line mono, and 2 stereo line channels
True 4-bus design
Solo, pan, and 16 kHz Air EQ on each submaster
6 individual aux sends per channel (2 pre, 2 post,
2 switchable pre/post)
3-band swept midrange EQ on mic channels;
4-band fixed on stereo line channels
75 Hz low-cut filters on mic channels
Mute, solo, signal present and OL LEDs on every channel
6 aux send masters with individual solos
4 stereo aux returns with EFX monitor
Separate Talkback section with mic preamp
Double-bused sub outs for easy multi-track routing
Balanced stereo TRS & XLR main outputs
Balanced XLR mono output with level control
Applications
Live sound mixing
Multi-track recording
Introduction
THE SR24•4-VLZ PRO is the latest update of our SR24•4
sound reinforcement console, incorporating our ultra-high
quality XDR™ (Extended Dynamic Range) mic preamps with
the best RFI rejection of any sound reinforcement mixer
design on the market.
Like all Mackie mixers, the SR24
•
4-VLZ PRO is designed
for rugged, 24-hour-a-day use. With its multiple input/
output configurations, true 4-bus architecture, 6 aux
sends, and extensive routing capabilities, it can be used
in a variety of live sound and recording applications. Its
sturdy steel construction houses rugged, double-sided
SMT-plated fiberglass circuit boards, and 60 mm faders
with ultra-tight lip seals for keeping out dust and other
contaminants. Impact-resistant knobs are mounted so they
“ride” just above the steel chassis.
The SR24•4-VLZ PRO has 20 mono mic/line input chan-
nels, with XLR mic inputs and 1/4" TRS line inputs, and 2
stereo line input channels with 1/4" TRS inputs. All mono
channels have TRS insert jacks (tip = send, ring = return).
Each channel strip has an input trim, 6 aux sends (2 pre-
fader, 2 post-fader, and 2 switchable pre or post), 3-band
EQ with sweepable midrange (4-band EQ on the stereo chan-
nels), pan control, and mute, solo, and bus assign switches.
A 60 mm fader provides output gain for each channel.
Twenty XDR mic preamps provide high-headroom and
low-noise. They are impedance-independent, so the fre-
quency response remains constant whether the mic preamp
is presented with an extremely high- or low-impedance
load. Additionally, each channel has its own switchable
low-cut filter (18 dB/octave @ 75 Hz).
The mono channel EQs provide a range of ±15 dB at the
following frequencies: 12 kHz shelving high-frequency EQ,
100 Hz to 8 kHz sweepable peaking mid-frequency EQ,
and 80 Hz shelving low-frequency EQ. The stereo channels
(21-24) provide ±15 dB of boost and cut at the following
frequencies: 12 kHz shelving high-frequency EQ, 3 kHz
peaking high-mid frequency EQ, 800 Hz peaking low-mid
frequency EQ, and 80 Hz shelving low-frequency EQ.
(continued on page 2)
R E L A T E D P R O D U C T S
SR32•4-VLZ PRO
