![background image](http://html1.mh-extra.com/html/mackie/hr824/hr824_owners-manual_3368877006.webp)
6
Figure 1. Horizontal Placement
job. But the simple fact is, “standard” rooms,
i.e. rectangular rooms in conventional business
or residential structures, are rarely if ever
conducive to optimal low bass reproduction
without some modifications.
Luckily, there are plenty of options short of
building a new control room, many of which
are covered in this manual.
Additional Tidbits of Wisdom
• When you shut down your equipment, turn
off the HR626 studio monitors first to
prevent thumps and other noises generated
by any upstream equipment from coming
out the speakers. When powering up, turn
on the monitors last.
• Save the shipping box! You may need it
someday, and you don’t want to have to pay
for another one.
• Save your sales receipt in a safe place.
• Also record all HR626 serial numbers in the
space provided on the inside front cover,
along with where and when you bought them.
Placement
The HR626s were designed to be placed in
either a horizontal or vertical position, and can
be used in either position for virtually any ap-
plication. For example, when using the HR626 as
a center speaker, you might position the speaker
horizontally above or below your video screen.
When using as left and right front or rear speak-
ers, you might position the speakers vertically.
AN EXTREMELY IMPORTANT NOTE
ON HR626 BASS RESPONSE AND
YOUR CONTROL ROOM
Your new HR626s achieve
their best bass response in
a room that’s optimized for
bass reproduction. A lot of
factors can conspire to
thwart the HR626s’ extended low frequency —
including room shape, room volume and
acoustical treatment.
This is not a cop-out or an apology. It’s plain
old physics in action. Luckily we’ve armed you
with some compensating controls which you
can use to optimize the frequency response of
the speakers in your particular room. Consider
the following:
The ACOUSTIC SPACE switch
must be set correctly
When you put your HR626s in a corner or
up against walls, their bass characteristics
change. Adjust the
ACOUSTIC SPACE
switch setting accordingly to avoid muddy or
exaggerated low frequency response.
Feel free to experiment
In many respects, every room is unique in
terms of its acoustics.
Even after you’ve read about how to set the
HR626’s rear panel switches, try other settings
to see if your particular room environment
requires different adjustments.
And, even after you’ve placed your monitors
where you
think
they’ll sound best, try moving
them around. You might be pleasantly surprised.
Finally, keep an open mind about
improving your room’s acoustics
and bass-handling ability
Nobody likes to buy a new set of monitor
speakers and then be told that they should
spend extra bucks on bass traps or a remodeling
Note:
The Mackie logo can be rotated 90º
so that it is oriented correctly when placing
the speakers either vertically or on their
sides. Gently pull out on the Mackie emblem,
rotate it, and push it back into place.