Mack V-MAC IV, Operator'S Handbook Manual

Page: 128 / 133

120 V-MAC Co-Pilot Operator's Manual
CO-PILOT® OPTIONAL SYSTEMS SCREENS
The vehicle management and control (V-MAC) IV system provides optional functions
that the driver can access through the Co-Pilot (if available and enabled). The Co-Pilot
Optional Systems screens include the following main screens:
•
Integrated Temp-A-Start™ (for future support)
•
Hours of Service (for future support; information not available at time of printing)
•
Road Connect (optional)
•
Accuload (for future support; information not available at time of printing)
To navigate through the screens, remember the following:
•
Use the stalk switch Up & Down button to scroll and highlight an item, scroll to
the next screen, or enter a value.
•
Use the Enter ( ↵ ↵
↵
) button to select a screen, enter a value, accept a change or
return to the previous screen.
•
Use the ESC button to return to the previous screen.
Integrated Temp-A-Start™ (For Future Support)
Integrated Temp-A-Start™ ( i TAS™) saves fuel by reducing the amount of time
spent idling to keep the vehicle's batteries charged, the engine warm and the cab or
sleeper comfortable. Once the optional
i TAS™ feature is activated via a dash switch,
the system will automatically start and stop the vehicle's engine. Safety overrides
prevent the system from activation if the transmission is in gear, the hood is up or the
parking brake is released.
iTAS™ voltage and temperature target settings are fully
programmable through either VCADS software or, if enabled, via the Co-Pilot display.
The i TAS™ submenu screen is selected from the stationary MAIN MENU 2 screen.
To view the screens of the i TAS™ submenu, highlight “ i TAS” with the stalk switch
Up & Down button and then press the Enter (
↵ ↵ ↵
) button to select the screen.
The i TAS™ submenu screen contains the following screens:
•
i TAS Status — Allows the user to view the current status of the i TAS system and
to turn on or turn off some of the status items.
•
i TAS Settings — Allows the user to set what conditions need to be monitored.
C0035416
Figure 74 — Integrated Temp-A-Start Screens
https://truckmanualshub.com/