Mack TerraPro LEU 2010, Operator'S Handbook Manual

Page: 39 / 225

28 SAFETY INFORMATION
CERTIFICATION LABELS
Safety Certification Label
National Highway Traffic Safety Administration (NHTSA) regulations require
affixing a certification label to all vehicles.
NHTSA regulations also require that the certification label be affixed to either
the hinge pillar, door latch post or the door edge that meets the door latch
post next to the driver seat. If none of these locations are practical, it may be
attached to the left side of the instrument panel or to an inward facing surface
of the driver-side door.
In compliance with NHTSA regulations, your Mack® vehicle has a safety
certification label affixed in one of the NHTSA locations listed above. This
label may be either an Incomplete Vehicle and/or Completed Vehicle label.
Both labels are described below.
Incomplete Vehicles
C0028955
A chassis-cab is an incomplete vehicle with a completed occupant
compartment that requires the addition of cargo-carrying, work-performing or
load-bearing components to perform its intended functions.
The chassis-cab manufacturer must affix a label to the incomplete vehicle in
one of the NHTSA locations listed above. This label provides the chassis-cab
date of manufacture, VIN and vehicle certification information.