4/21
4. Configuration of the Network Adapter
– settings
The following setup is required to run the installation of the Network Adapter:
Required items:
An Ethernet interface at the computer used for configuration
An Ethernet cable (CAT5E)
a Windows PC
Browser (recommended Google Chrome or Firefox)
Network Adapter (this product)
For the configuration of the Network Adapter settings connect the instrument directly or via a switch to a configuration PC with
an Ethernet cable (CAT5E).
For the connection use interface eth1 (see Pic.2)
Pic.2: Ethernet interfaces
NOTICE
The availability of the Network Adapter in the network can be checked via a ping to the IP address
192.168.2.1. The PC used for the configuration must have an IP address in the range 192.168.2.0/24.
NOTICE
Changing the IP address may be necessary to avoid conflicts between addresses within the setup.
Please ask your IT department for support.
Laptop or PC
Network Adapter
LAN1 (eth1)
LAN1
