Mach Power WL-CPE2G24-065, User Manual

Page: 6 / 36

CHAPTER 1
HOW TO CONNECT AND CHARGE THE OUTDOOR CPE
1.1 CPE’s Interface Description
Reset: Press it for 10-15 seconds, the CPE will restore to factory default.
WAN: Connect with internet cable, in WiFi Repeater, bridge, WISP opera-
tion mode, it change to LAN port.
DC: for Power supply, the DC’s electronic standard is 12V/24V.
POE: this equipment can be powered over Ethernet, Connect CPE’s
WAN Port with PoE adapter’s POE port by LAN Cable (CPE’s WAN port
support the 24V PoE.)
Please refer to next image for PoE Power and CPE configure
Pls make sure our CPE working with included Power adapter or
PoE adapter, and under right connection way, or the device will be
damaged.
6