Mace HydroMace XCi, Product Manual, Page: 93 / 270

Ordering the SDI-12 or ASCII output string
The number and order of channel values in the output string for SDI-12 or RS232, ASCII output are
configured using
From the “ FloSI settings ” dialogue box, move the required channels from the “ Available channels ” table
to the “ Output channels ” table by highlighting the desired channel in the “ Available channels ” table and
clicking the ” Right arrow ”. If a channel in the “ Output channels ” table is no longer required, highlighting it
and clicking the ” Left arrow ” will remove it from the “ Output channels ” table. The position of a channel in
the “ Output channels ” table can be changed by highlighting the channel and clicking the " up " or " down "
arrow.
WARNING: The user must ensure that there are no two devices with the same
address on the same bus. In such a case, the behaviour of the bus is unpredictable.
MACE XCi User Manual - 93 -