Mace HydroMace XCi, Product Manual, Page: 30 / 270

Solar panel installation on a 2" pole
The solar panel is used to charge the internal battery of the XCi device where mains power is unavailable.
This installation guide assumes you have the MACE mounting kit (850-302).
NOTE: Users are advised to ascertain the suitability of solar panels for their
application by checking relevant solar radiation maps for their region (for example
those found using a " Solar Radiation Map "). As a guideline, for an HydroMACE XCi
with three I/O cards measuring every five minutes, at least three hours sunlight is
required per day.
1. From within the MACE Mounting Kit (850-302) locate the parts associated with the solar panel
mounting.
2. Remove the two solar panel side brackets and the M6 x12 bolts, washers (spring/flat) and nuts.
3. Place the side bracket so that the two holes match those in the solar panel frame and the vertical edge
is outermost.
MACE XCi User Manual - 30 -