Mace HydroMace XCi, Product Manual, Page: 239 / 270

"Binary status" - output type
The " Channel value level status " and " Channel value range status " channel types are used in
conjunction with a " Binary status output " in order to turn pumps (irrigation, dosing, wet-well etc.) and other
ancillary devices ON/OFF based on various measured parameter values.
WARNING: The Binary Status Output is provided as is, without any guarantees or
warranty. MACE makes no warranties of any kind, either express or implied,
including but not limited to warranties of merchantability or fitness for a particular
purpose. Use of this feature is at the user's risk.
NOTE: The Binary Status Output is set to OFF when the XCi device is first "Started",
when it is "Stopped" or in a "Flat battery state".
From the " Device settings " dialogue box, click " Configure outputs " and the " Configure outputs "
dialogue will open
MACE XCi User Manual - 239 -