Mace HydroMace XCi, Product Manual, Page: 166 / 270

NOTE: Only " Digital input #3 " can be used for " Pulse event " or " Status
change event " input types
4. Click “ Continue ” to complete the new channel. The “ Configure channels ” dialogue box will re-
appear with the new channel listed.
Edit a "Status change event" channel type
Units text
This sets the units on the logged value. This is a text field and is user defined. In this example the “ Event ”
channel is being used to monitor the on/off condition of a pump. In the data the word “ Pump ” will be logged
whenever the pump is on.
Invert input
If this check box is ticked then the value will be inverted before it is logged.
Edit a "Pulse event" channel type
MACE XCi User Manual - 166 -