Mace HydroMace XCi, Product Manual, Page: 121 / 270

Setting logging and display attributes for channels
Under certain circumstances, it may be desirable to log only the values from certain channels of an XCi
configuration. For example, when logging a flow rate and accumulated total that is calculated from a velocity
and a depth measurement in a partially-full pipe, the user may decide that only the flow rate and totaliser
channels will be logged.
1. Simply highlight the channel name that is to have the logging attribute set to " yes
" or "
no
", right-click
on the highlighted channel and select "
Do not log
" or "
Log channel
". Once the attribute has been
set, it will appear in the "
Configure channels
" dialogue box.
Under certain circumstances, it may be desirable to display only the values from certain channels of an XCi
configuration on the external LCD. For example, when a flow rate and accumulated total that is calculated
from a velocity and a depth measurement in a partially-full pipe is calculated, the user may decide that only
the flow rate and totaliser channels will be displayed.
MACE XCi User Manual - 121 -