25 |
P a g e
Fundamentals
The workplace inspection helps the operator determine if the workplace is
suitable for safe machine operation. It should be performed by the operator prior
to moving the machine to the workplace.
It is the operator's responsibility to read and remember the workplace hazards,
then watch for and avoid them while moving, setting up and operating the
machine.
Workplace Inspection
Be aware of and avoid the following hazardous situations:
•
Bumps, floor obstructions or debris
•
Slopes
•
Unstable or slippery surfaces
•
Overhead obstructions
•
Hazardous locations
•
Inadequate surface support to withstand all load forces imposed by the
machine
•
Wind and weather conditions
•
The presence of unauthorized personnel
•
Other possible unsafe conditions
Summary of Contents for Bumpa 110v 6m
