215953
45
Revision A
Chapter 4:
Maintenance
The swath compressor does not require any scheduled maintenance or servicing.
If it
’
s necessary to replace components, refer to
5 Illustrated Parts Lists, page 55
in this manual.
4.1
Removing Swath Compressor Shield
Windrower service or maintenance procedures may require access under the machine. Do
NOT
sit on the swath
compressor shield to service the windrower. Remove the shield as follows:
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, stop the engine and remove the key
from the ignition before leaving the operator
’
s seat.
1021929
A
Figure 4.1: Swath Compressor Lock
1.
Disengage swath compressor lock (A).
2.
Start the windrower and fully lower the swath compressor.
3.
Shut down the engine, and remove the key from
the ignition.
1021869
A
B
Figure 4.2: Forward Pivot Pin
4.
At the front of the swath compressor, remove hairpin (A)
from pivot pin (B) on both sides of the frame.
