214880
56
Revision A
Positioning Rear Baffle Deflector Fins
Four rear baffle deflector fins are located under the baffle. Fins are factory-configured to approximately 60°. They can be
adjusted when a narrower windrow is desired.
To adjust fins, follow these steps:
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key from ignition
before leaving operator's seat for any reason.
Figure 3.71: Deflector Fins Under Baffle
1.
Deflector fins (A) are located on the underside of the rear
baffle.
NOTE:
There are two fins on the left and two fins on the right of
the header.
Figure 3.72: Left Deflector Fins in Field Position
under Baffle
2.
To adjust deflector fins (A), use existing bolt and nut (B).
Once adjusted to the desired angle for windrow width,
torque nut to 69 Nm (51 lbf·ft).
3.
Repeat for the opposite deflector fins.
NOTE:
Fins may interfere with crop flow in large-stemmed crops,
or when using the double windrower attachment. It may be
necessary to remove fins in these conditions.
