MacDon R116, Unloading And Assembly Instructions

Page: 93 / 234

214713
85
Revision A
Installing Light Assembly
1018614
A
C
B
Figure 4.70: Left, Rear End of Mower
1. Locate right side light assembly (A).
NOTE:
When the mower is in field position, the right light
assembly is located on the left, rear side of the mower.
When the machine is being towed, it will be on the
right side.
2. Loosen bolt (C). Rotate the light assembly (A) up to
position shown at right.
3. Install bolt (B).
Connecting Transport Lighting Module
1015226
A
B
Figure 4.71: Transport Lighting Module
1. Connect harness (A) to transport lighting module (B).
Installing Remote Control
1015230
A
Figure 4.72: Remote Control on Top of Hitch
1. Retrieve remote control (A) with wiring harness.
2. Place remote control (A) on hitch temporarily.
ASSEMBLING THE DISC MOWER (FACTORY-INSTALLED TRANSPORT)