MacDon R113, Operator'S Manual, Page: 76 / 276

OPERATION
3. Close the steering lock-out valve by turning the handle
to the vertical position.
Figure 3.60: Steering Lock-Out Valve in
Open Position
4. Raise the mower conditioner fully, and close the
cylinder lock-out valve (A) on each lift cylinder by
turning the handle to the horizontal position.
WARNING
Do NOT tow unless the steering cylinder is fully
charged.
If steering cylinder is not fully charged,
loss of control, injury, or death could result.
Figure 3.61: Cylinder Lock-Out Valve
5. Move jack (A) to storage position on side of hitch, and
secure with pin (B).
6. Ensure tires are properly in fl ated.
7. Keep Slow Moving Vehicle (SMV) sign, re fl ectors, and
lights clean and visible at rear of mower conditioner.
Figure 3.62: Jack in Storage Position
3.15.2 Transporting with a Tractor
If towing endwise with the optional endwise transport system, refer to
Converting from Field to Transport Mode,
page 71
to prepare the mower conditioner for transport; otherwise, refer to
3.15.1 Preparing Mower Conditioner for
Transport, page 65
.
169820
66
Revision A