4.10
Roll Conditioner
4.10.1
Inspecting Roll Conditioner
DANGER
To avoid bodily injury or death from unexpected start-up or fall of a raised machine, stop engine, remove
key, and engage header lift cylinder lock-out valves before going under machine for any reason.
CAUTION
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear
gloves when handling blades.
1. Lower mower conditioner fully, stop engine, and
remove key.
2. Engage lift cylinder lock-out valves (refer to
).
3. Remove left and right driveshields (A). Refer to
Removing Driveshields, page 227
.
Figure 4.246: Driveshields
4. Inspect left side roll conditioner bearing (A) for signs of
wear or damage.
Figure 4.247: Left Side Roll Conditioner Bearing
169820
231
Revision A
