Removing Cutterbar Spindle Shear Pin
DANGER
Stop engine and remove key from ignition before
leaving operator’s seat for any reason. A child or
even a pet could engage an idling machine.
1. Raise mower conditioner fully, shut off engine, and
remove key.
2. Engage lift cylinder lock-out valves (refer to
).
3. Open cutterbar doors and clean debris from work area.
Figure 4.141: Cutterbar Doors
4. Remove disc assemblies from cutterbar as follows:
•
Cutterbar Disc
(A): Refer to
•
Driven Rotary Deflector
(B): Refer to
Driven Rotary Deflectors and Driveline, page 174
•
Non-Driven
Rotary
Deflector
(C): Refer to
Removing Non-Driven Rotary Deflectors, page 181
.
Figure 4.142: Cutterbar Disc Assemblies
5. Remove damaged shear pin (A) from pinion using a pin
punch and hammer. Do NOT damage the pin bore on
the pinion.
6. Refer to
Installing Cutterbar Spindle Shear Pin, page
.
Figure 4.143: Shear Pin
169820
185
Revision A