2. Slide rock guard (A) forward in the direction of arrow (B)
and remove.
Figure 4.109: Rock Guard Removed
from Cutterbar
Installing Rock Guards
1. Guide rock guard onto cutterbar until tabs (A) sit on top
of the cutterbar while bottom back bolt holes line up.
Figure 4.110: Rock Guard Installed on Cutterbar
2. Install two hex head screws, washers, and lock nuts
(A). Torque to 50 ft
·
lbf (68 N
·
m).
Figure 4.111: Rock Guard Hardware
169820
172
Revision A
