Positioning Rear Baffle: Finger Conditioner
The rear baf
fl
e determines the width and height of the
windrow. It is located immediately behind and above the
conditioner and can be positioned to do the following:
• Direct the crop
fl
ow into the forming shield for narrow
and moderate width windrows.
• Direct crop downward to form a wide swath.
Figure 3.107: Finger Conditioner Rear Baffle
DANGER
Stop engine and remove key from ignition before
leaving operator’s seat for any reason. A child or
even a pet could engage an idling machine.
1. Pull rear baf
fl
e adjustment lever (A) in the outboard
direction to disengage tab from adjustment plate (B).
2. Position rear baf
fl
e adjustment lever (A) as follows:
• Move lever forward to
raise
baf
fl
e.
• Move lever backward to
lower
baf
fl
e.
3. Release rear baf
fl
e adjustment lever (A) so that tab
engages hole in adjustment plate (B).
Figure 3.108: Rear Baffle Adjustment Lever
169820
93
Revision A
