215333
295
Revision A
1010880
A
B
C
D
Figure 4.369: Header
–
View from Left
4.
Lift shield (A) until pins (B) (one on each side) disengage
from the slots in support (C) and from the shield on
panel (D).
1015040
A
Figure 4.370: Shield Rotated
5.
Rotate shield (A) 90° and move it away from the
carrier frame.
4.9.2
Installing Discharge Shield
–
No Conditioner
Follow these steps to install the shielding on a rotary disc pull-type configured without a conditioner:
1015062
B
A
Figure 4.371: Rotary Disc Pull-Type with Transport
1.
Raise the rotary disc pull-type fully and extend the center-
link to maximize the space between field wheels (A) and
carrier frame (B).