215333
256
Revision A
Removing Conditioner Drive Belt
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
1.
Lower the rotary disc pull-type fully.
2.
Shut down the engine, and remove the key from the ignition.
1010709
A
Figure 4.277: Left Driveshield
3.
Remove left driveshield (A). For instructions, refer to
Removing Driveshields, page 219
.
1022898
A
B
C
D
Figure 4.278: Conditioner Drive
4.
Turn jam nut (A) counterclockwise to unlock tension
adjustment.
5.
Turn jam nut (A) and adjuster nut (B) counterclockwise to
fully collapse tensioner spring (C) and release the tension
from conditioner drive belt (D).
6.
Remove drive belt (D).
