215333
222
Revision A
Replacing Driveshield Latch
CAUTION
Do NOT operate the machine without the driveshields in place and secured.
NOTE:
Images shown are for left side driveshield
—
right side driveshield is similar.
1010709
A
Figure 4.199: Driveshield
1.
Remove driveshield (A). For instructions, refer to
1010701
A
Figure 4.200: Backside of Driveshield
2.
Remove hex nut (A) and flat washer securing latch to the
backside of the driveshield, replace latch if worn or
damaged, and reinstall the nut and washer.
1010185
A
B
Figure 4.201: Stud and Clip Assembly
3.
Remove two carriage bolts (A), replace stud and clip
assembly (B) if worn or damaged, and reinstall
carriage bolts.
4.
Install driveshield. For instructions, refer to
