215333
197
Revision A
1024913
A
A
A
A
B
Figure 4.142: Non-Driven Drum
4.
Remove the four M12 bolts (A) outside the drum using an
18 mm socket.
5.
Remove disc assembly (B).
Installing Small Non-Driven Drum
–
R116 PT
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
1.
Lower the rotary disc pull-type fully.
2.
Shut down the engine, and remove the key from the ignition.
1017492
A
Figure 4.143: Non-Driven Spindle
3.
Ensure spacer (A) is on spindle.
