215333
189
Revision A
1027711
A
Figure 4.122: Cutterbar Doors
7.
Close cutterbar doors (A). For instructions, refer to
Closing Cutterbar Doors, page 38
Removing Small Driven Drum and Driveline
–
R116 PT
WARNING
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and remove the key
from the ignition before leaving the operator
’
s seat for any reason.
WARNING
Exercise caution when working around the blades. Blades are sharp and can cause serious injury. Wear gloves when
handling blades.
NOTE:
Illustrations show left drum and driveline.
1.
Lower the rotary disc pull-type fully.
2.
Shut down the engine, and remove the key from the ignition.
1027711
A
Figure 4.123: Cutterbar Doors
3.
Open cutterbar doors (A). For instructions, refer to
.
