262391
175
Revision A
4.5.2
Driveline Guards
Removing Driveline Guards
Driveline guards protect components from dirt and debris, and protect operators from moving components. Driveline
guards need to be removed before drivelines can be serviced or removed.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat.
WARNING
Do NOT operate the machine without the driveline guards in place and securely fastened.
Driveline guards protect both ends of the cross driveline and the primary driveline. To remove the driveline guards, follow
these steps:
1.
Lower the header fully.
2.
Shut down the engine, and remove the key from the ignition.
ϭϬϰϯϴϯϱ
A
A
B
Figure 4.177: Driveline Guards
3.
To remove driveline guards, press clips (A) on either side of the guard while pulling guard (B) backward on the driveline
shaft.
