262391
116
Revision A
1029018
Figure 4.66: Clockwise Disc Rotation
Inspecting Disc Blade Hardware
Inspect the blade attachment hardware each time the blades are changed.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator
’
s seat.
WARNING
Disc blades have two sharp cutting edges that can cause serious injury. Exercise caution and wear gloves when working
with, or near, blades.
WARNING
Damaged or loose disc blades or blade attachment hardware can be ejected during machine operation and may cause
personal injury or machine damage.
For hardware replacement instructions, refer to
Removing Disc Blades, page 118
and
Installing Disc Blades, page 119
.
1.
Shut down the engine, and remove the key from the ignition.