MacDon PW8, Operator'S Manual

Page: 73 / 304

214657
59
Revision A
Figure 3.60: Attaching Coupler
13. Position coupler onto header receptacle (A) and push
handle (B) downward to engage pins into receptacle.
14. Push handle (B) to closed position until lock button (C)
snaps out.
15. Open cover (D) on header electrical receptacle.
16. Remove electrical connector (E) from combine.
17. Align lugs on electrical connector (E) with slots in
header receptacle, push connector onto receptacle, and
turn collar on connector to lock it in place.
Detaching from New Holland CR/CX Combine
DANGER
To avoid bodily injury or death from unexpected startup of machine, always stop engine and remove key
from ignition before leaving operator
’
s seat for any reason.
1. Choose a level area, and position the header slightly off the ground.
2. Stop the engine and remove the key from the ignition.
Figure 3.61: Releasing Coupler
3. Push in lock button (C), and pull handle (B) upward to
release coupler (A).
4. Remove coupler (A) from header receptacle.
OPERATION