MacDon PW8, Operator'S Manual

Page: 122 / 304

214657
108
Revision A
Figure 4.29: Case IH Combine Display
6. From the BELT DRIVE TYPE menu (A), select
•
1 - for most pickup headers
•
2 - for 4.9 m (16 ft.) Rake-Up pickup headers
•
3 - for SwathMaster pickup headers
NOTE:
Proper belt drive selection optimizes auto-belt to
ground speed.
Checking Voltage Range from Combine Cab (Case IH 5130/6130/7130; 5140/6140/7140)
NOTE:
Changes may have been made to combine controls or display since this document was published. Refer to
combine operator
’
s manual for updates.
CAUTION
Check to be sure all bystanders have cleared the area.
1. Raise header until header wheels are 150 mm (6 in.) above ground.
Figure 4.30: Case IH Combine Display
2. On the main page of the combine display, select
DIAGNOSTICS (A). The DIAGNOSTICS page opens.
AHHC SYSTEM