MAC215990
52
Revision A
3.3
Break-in Period
During the first 50 hours of operation, certain systems on the header will require extra attention. Follow this procedure to
ensure the service life of the header.
NOTE:
Until you become familiar with the sound and feel of your new header, be extra attentive.
DANGER
Before investigating an unusual sound or attempting to correct a problem, shut off the engine and remove the key from
the ignition.
After attaching the header to the combine for the first time, follow these steps:
1.
Operate the machine with the reels, drapers, and knives running slowly for five minutes. Watch and listen
FROM THE
OPERATOR
’
S SEAT
for binding or interfering parts.
NOTE:
The reels and side drapers will not operate until the hydraulic oil fills the lines.
2.
Refer to
4.2.2 Break-in Inspection, page 245
and perform all the specified tasks.
