MAC215990
411
Revision A
1009847
A
C
D
E
B
Figure 4.322: Tine Tube Reinforcing Kit
Support
–
Option
27. Reattach channels (C) to three right-facing supports (A) on
each reel with screws (B) and nuts. Torque the screws to
43 Nm (32 lbf
∙
ft).
28. Using screws (E), reinstall any fingers (D) that were
previously removed. For instructions, refer to:
•
Installing Plastic Fingers, page 399
•
Installing Steel Fingers, page 397
1024528
A
C
D
E
B
Figure 4.323: Tine Tube Reinforcing Kit Opposite
Support
–
Option
29. Reattach channels (C) to two left-facing supports (A) on
each reel with screws (B) and nuts. Torque the screws to
43 Nm (32 lbf
∙
ft).
30. Using screws (E), reinstall any fingers (D) that were
previously removed. For instructions, refer to:
•
Installing Plastic Fingers, page 399
•
Installing Steel Fingers, page 397
4.13.6
Reel Endshields
Reel endshields and supports do not require regular maintenance, but they should be checked periodically for damage and
loose or missing fasteners. Slightly dented or deformed endshields and supports are repairable, but it
’
s necessary to
replace severely damaged components.
There are four kinds of endshields. Ensure you are installing the correct endshield to the proper location as shown below.
