262175
231
Revision A
A
ϭϬϰϮϱϯϲ
Figure 5.297: Calibration Page
11. Once the calibration completes all nine stages, the
calibration is complete. The message CALIBRATING
COMPLETED appears. Select X icon (A) to leave the page.
5.6.2
Calibrating Header Position Sensors on HarvestTouch
™
Display
The header position sensors need to be recalibrated whenever the HarvestTouch
™
Display is replaced, a position sensor is
replaced, sensor readouts are erratic, a pump has been replaced, or when a new header type or attachment is connected
to the windrower.
DANGER
Ensure that all bystanders have cleared the area.
NOTE:
This calibration
MUST
be performed with the engine running and the header engaged.
1.
Clear all bystanders from the area.
2.
Start the engine.
A
B
ϭϬϰϮϭϰϯ
Figure 5.298: HarvestTouch
™
Display
3.
Engage the header.
NOTE:
Once the header is engaged, header gauges (A) will appear
on the HarvestTouch
™
Display home page.
4.
Select MENU (B) icon.
