MacDon M205, Operator'S Manual

Page: 95 / 514

214603
75
Revision A
Double Windrow Attachment (DWA) / Swath Compressor Switch (if installed)
The functions performed by the DWA/swath compressor switch depend on how the windrower is equipped.
1018379
A
B
C
D
Figure 3.67: Console Switches
If the windrower is equipped with a double windrow
attachment:
•
The DWA deck is raised with switch (A) in position (C)
•
The DWA deck is lowered with switch (A) in position (B)
The cab display module (CDM) must be programmed for
this configuration. Refer to
Activating the Double Windrow
Attachment (DWA), page 98 .
Switch (A) may be used instead of the DWA switches on the
ground speed lever (GSL).
The DWA draper speed is controlled with the rotary
switch (D) next to the rocker switch on the operator
’
s
console.
For more information on the DWA attachment and controls,
refer to
4.4.10 Using the Double Windrowing Attachment,
page 213 .
If the windrower is equipped with a swath roller
attachment:
•
The swath compressor is raised by pressing switch (A) to position (C)
•
The swath compressor is lowered by pressing switch (A) to position (B)
OPERATOR
’
S STATION