215794
21
Revision A
3.2
Repositioning Right Leg
The right cab-forward leg must be changed from the shipping configuration to the field configuration.
IMPORTANT:
Do
NOT
open the right cab-forward door when the right leg is in the shipping configuration. If the door contacts the leg,
the door glass may shatter, or the door seals may be damaged.
1005741
A
Figure 3.4: Windrower Right Leg Bolts
1.
Remove two bolts, washers, and nuts (A) from the frame.
1026508
A
B
Figure 3.5: Right Leg
2.
With the support stand from Step
in place,
position lifting device (A) under right drive wheel (B). Raise
the right drive wheel so that the right cab-forward leg is not
bearing any of its weight.
NOTE:
The support stand is not shown in the illustration.
1005742
A
Figure 3.6: Windrower Frame
3.
Adjust the lifting device
’
s lift height until pin (A) is loose.
Extract the pin from the front of the frame using slide
hammer (B) or a leg pin removal tool (MD #209816) .
NOTE:
Use of a slide hammer or leg pin removal tool is required
due to the limited amount of space in front of the diesel
exhaust fluid (DEF) tank.
NOTE:
Removing the pins will be difficult if the right leg is bearing
any of the wheel
’
s weight.
