215015
63
Revision A
3.13
Installing Beacons
1006087
Figure 3.72: Beacon Light
1.
Retrieve the two beacons from the shipment.
2.
Remove the hardware and rubber base from one of the
beacons as shown.
1006089
Figure 3.73: Rubber Beacon Base on Mounting
Bracket
3.
Feed the connectors from the harness through the center
hole in the rubber base.
4.
Place the base on the beacon bracket ensuring that the
mounting holes in the rubber base line up with the holes in
the bracket.
1006093
A
B
C
Figure 3.74: Beacon Light Wire Routing
5.
Connect orange wire (A) from the harness to red wire (B) in
the beacon.
6.
Connect black wire (C) from the harness to the ground
terminal in the beacon.
